Follow your Samsara load instructions for which gate you will be picking up out of.
You will be required to scale in and out
PPE must be worn at all times at this facility
Obey all speed limit signs
Follow instruction for and directions for either live loading or picking up a preload from the drop lot. Below is an example of a Cold Mill Bay where a coil is being loaded.
If loading coil plates or sheets you will probably load at Gate 1. If you pick up Bar/Slinky which will be loaded by forklifts, they are loaded at Gate 5, an Easy marker is the bridge running over HWY. 42. Once you pull in and put the equipment out a side loader will put material on your tailer.
